Traffic Light Controller / Sequencer 1-Channel / Emergency Flasher / Beacon For Sale

Fast Free ShippingLifetime WarrantyFriendlyCustomer ServiceOffering the Best Deals onTMSingle Channel Traffic Light Controller - Sequencer 85VAC-265VAC / Emergency Flasher
Guaranteed to work with all LED and incandescent lights!Click Here and add 6' power cord to your cart for just 4.99 and free domestic shipping with sequencer purchaseTraffic Light not style="text-align:justify">If you're looking to power up a warning signal or construction flasher, the Single Channel Light Controller is the perfect solution. The universal input accepts both 120VAC and 240VAC line voltages and provides up to 500 Watts of power per channel. In fact, our controller is powerful enough to drive any full-sized incandescent traffic light, yet sensitive enoughto work with the most cost-efficient LED bulbs all the way down to 4 watts. Solid-state outputs also meanboth inductive and non-inductive loads can be switched effortlessly for years.​​​​​​​There are four different modes including a 50-50 on-off flasher, single strobe flash, double strobe flash, and a random flashing mode. Adjusting the duration allows for a full range of timing possibilities.

Thisunit comes withquick installation instructions and four (4) adhesive standoffs for effortless mounting on virtually any surface. No need to buy additional hardware or fumble with crimp connectors. Installs in less than 10 minutes.Your traffic light doesn't havea power cord?No problem. Simply place this sequencerin yourcart and thenClick hereto add a power cord for just$4.99. Make sure to add both the sequencerand power cord to the cart to ensure that you get free domestic shipping on both. If you are inadvertently charged shipping, don't worry, we will refund any and all shipping charges on domestic purchases.​​​​​​​Buy with confidence. Proudly made in the time delay from 0.1 seconds to 12 seconds (depending on mode).

Four (4) selectable modes: 50-50 on-off, single strobe, double strobe, and random.

Wide input voltage range, accepting from 85 to 265VAC with input fuse protection.

Highly efficient power conversion draws less than 0.1 watts from the logic side.

Independent output channel for operating LEDs or Incandescent lamps.

Solid-state switching for silent operation (no clicking mechanical relays).

Snubberless™ technology to protect against reverse voltage spikes.

Onboard LED to show current output state for easy programming and setup.

Compatible with all traffic lights & bulbs (non-dimmable LED bulbs included).

Four adhesive standoffs to allow for effortless Voltage: 85VAC to 265VAC (works on both 120VAC and 240VAC)

Max Output Rating:125VAC @ 4A per channel (fused at 6.3A)

Wattage Rating:4 Watts (minimum) 500Watts (maximum) per channel

Input Connector:14-26AWG, 250VAC @ 16A screw terminals

Output Connector:14-26AWG, 250VAC @ 16A screw terminals

Delay Range:0.2-12seconds (strobe modes), 0.1to 2 seconds (50-50 on-off mode)

Board Dimensions: 2.85"x 1.97" (7.24cm x 5.00 cm)

Board Material:0.062" (1.6 mm) FR-4, withsolder mask & silk screen

Unit Weight: 0.9ounces (29grams)

We accept payment by any of the following methods:

Your order will be shippedwithin 1 businessday of receiving payment (Monday-Friday) and you should expect to receive it 3-4 daysafter ship date.

In the unlikely event that your item is lost or damaged during shipment, we will takeresponsibilityand will immediately ship areplacement.

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one.

You can return a product for up to 30days from the date of purchase.

Any product you return must be in the same condition you received it and in the original packaging.

Limited Lifetime Warranty

For as long as you own this product we guaranteed it to operate properly and be free of defects in materials and workmanship. Should a Galak Electronics product fail at any time, return it to us. We will repair it, or at our discretion, replace it at no additional charge, and pay the return shipping cost. If the failure is found to be due to user negligence (i.e. exceeding maximum rated specifications, water damage, short circuits) you will be charged a maximum cost no more than the original purchase price.

Traffic Light not included

If you're looking to power up a warning signal or construction flasher, the Single Channel Light Controller is the perfect solution. The universal input accepts both 120VAC and 240VAC line voltages and provides up to 500 Watts of power per channel. In fact, our controller is powerful enough to drive any full-sized incandescent traffic light, yet sensitive enoughto work with the most cost-efficient LED bulbs all the way down to 4 watts. Solid-state outputs also meanboth inductive and non-inductive loads can be switched effortlessly for years.​​​​​​​There are four different modes including a 50-50 on-off flasher, single strobe flash, double strobe flash, and a random flashing mode. Adjusting the duration allows for a full range of timing possibilities.

Thisunit comes withquick installation instructions and four (4) adhesive standoffs for effortless mounting on virtually any surface. No need to buy additional hardware or fumble with crimp connectors. Installs in less than 10 minutes.Your traffic light doesn't havea power cord?No problem. Simply place this sequencerin yourcart and thenClick hereto add a power cord for just$3.99. Make sure to add both the sequencerand power cord to the cart to ensure that you get free domestic shipping on both. If you are inadvertently charged shipping, don't worry, we will refund any and all shipping charges on domestic purchases.​​​​​​​Buy with confidence. Proudly made in the time delay from 0.1 seconds to 12 seconds (depending on mode).

Four (4) selectable modes: 50-50 on-off, single strobe, double strobe, and random.

Wide input voltage range, accepting from 85 to 265VAC with input fuse protection.

Highly efficient power conversion draws less than 0.1 watts from the logic side.

Independent output channel for operating LEDs or Incandescent lamps.

Solid-state switching for silent operation (no clicking mechanical relays).

Snubberless™ technology to protect against reverse voltage spikes.

Onboard LED to show current output state for easy programming and setup.

Compatible with all traffic lights & bulbs (non-dimmable LED bulbs included).

Four adhesive standoffs to allow for effortless Voltage: 85VAC to 265VAC (works on both 120VAC and 240VAC)

Max Output Rating:125VAC @ 4A per channel (fused at 6.3A)

Wattage Rating:4 Watts (minimum) 500Watts (maximum) per channel

Input Connector:14-26AWG, 250VAC @ 16A screw terminals

Output Connector:14-26AWG, 250VAC @ 16A screw terminals

Delay Range:0.2-12seconds (strobe modes), 0.1to 2 seconds (50-50 on-off mode)

Board Dimensions: 2.85"x 1.97" (7.24cm x 5.00 cm)

Board Material:0.062" (1.6 mm) FR-4, withsolder mask & silk screen

Unit Weight: 0.9ounces (29grams)

We accept payment by any of the following methods:

Your order will be shippedwithin 1 businessday of receiving payment (Monday-Friday) and you should expect to receive it 3-4 daysafter ship date.

In the unlikely event that your item is lost or damaged during shipment, we will takeresponsibilityand will immediately ship areplacement.

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one.

You can return a product for up to 30days from the date of purchase.

Any product you return must be in the same condition you received it and in the original packaging.

Limited Lifetime Warranty

For as long as you own this product we guaranteed it to operate properly and be free of defects in materials and workmanship. Should a Galak Electronics product fail at any time, return it to us. We will repair it, or at our discretion, replace it at no additional charge, and pay the return shipping cost. If the failure is found to be due to user negligence (i.e. exceeding maximum rated specifications, water damage, short circuits) you will be charged a maximum cost no more than the original purchase price.

Fast Free ShippingLifetime WarrantyFriendlyCustomer ServiceOffering the Best Deals onTMCrosswalk / Railroad Crossing 2-Channel Traffic Light Controller - 85VAC-265VAC
Guaranteed to work with all LED and incandescent lights!Click here and add 6' power cord to your cart for just $3.99 and free domestic shipping with sequencer purchaseTraffic Light not improved with the latest in switching technology, our AC CrossingLight Controller is the perfect solution for your vintage traffic signal. Universal inputaccepts both120VAC and 240VAC line voltagesandprovides up to 650Watts of power per channel —more than any other controller on the market!In fact, our controller is powerful enough to drive anyfull-sized incandescent traffic light, yet sensitive enought to work with the most cost-efficient LED bulbs all the way down to 4 watts. Thanks to newSnubberless™technology, unlike other solid state controllers, our controller does not suffer from voltage bleed. So no glowing or flickeringin the off state.Solid statealso means quiet, effortlessswitching for many years.Mechanical relays are noisyand can fail after several months under shortcycle times. For this reason solid state relays have been the industry standard in the traffic light control for over 30 years.

The logic section is protected by a rugged yet energy efficient solid state switching circuit. It can handle voltage spikes up to 1KV, yet only draws about 1/10watt.Using microcontroller technology,Six (6)customsequences are programmedinto thisunit andcan be easily selected with the push of a button. No need to cycle power to change the program.(Note: the sequence is storedeven when powered off).​​​​​​​Features include an adjustable duration, as well as an on-board andexternalcrosswalk button control. Press the button and the crosswalk will revert to green just like the real thing. The pedestrian crosswalk modealso includes realistic flashing red "don't walk" action.

Thisunit comes withquick installation instructions and four (4) adhesive standoffs for effortless mounting on virtually any surface. No need to buy additional hardware or fumble with crimp connectors. Installs in less than 10 minutes.Your traffic light doesn't havea power cord?No problem. Simply place this sequencerin yourcart and thenClick hereto add a power cord for just$3.99. Make sure to add both the sequencerand power cord to the cart to ensure that you get free domestic shipping on both. If you are inadvertently charged shipping, don't worry, we will refund any and all shipping charges on domestic purchases. Buy with confidence. Made in the to program mode selection with pushbutton control.

User selectable time delay from 3seconds to 60 seconds, (0.2 to 2 seconds for railroad crossing).

Separate fixed time for "flashing" don't walk light (count proportional to duration setting).

6 selectable sequences including: crosswalk,RR xing, "Jurrassic" style and vintage 2 light signals.

On boardcrosswalk button as well asan external connection for interactive operation.

Highly efficient power conversion draws just 0.1W from the logic side.

Independent outputs channels for operating LEDs or incadescent lamps at the input voltage.

Solid state switching for silent operation (no clicking mechanical relays).

Snubberless™ technology to protect against reverse voltage spikes.

Onboard LEDs to show current output states.

Compatible with virtually all types of 120VAC-240VAC pedestrian or railroad crossing lights.

Four adhesive standoffs to allow for effortless Voltage: 85VAC to 265VAC (works onboth 120VAC and 240VAC)

Max Output Rating:125VAC @ 5.2A per channel (fused at 6.3A)

Wattage Rating:4 Watts (minimum) 650 Watts (maximum) per channel

Input Connector:12-24AWG, 250VAC @ 16A screw terminals

Output Connector:12-24AWG, 250VAC @ 16A screw terminals

Delay Range:VR1: 3-60 seconds (pedestrian crossing), 0.2 to 2 seconds (RR-xing)

Board Dimensions:3.94 x 1.97" (10 cm x 5.0 cm)

Board Material:0.062" (1.6 mm) FR-4, withsolder mask & silk screen

Unit Weight: 1.3ounces (37grams)

DISCLAIMER:This unit is not designed tocontrol,manipulate or inhibit the natural pattern of an actual traffic signal. Complies with all FCCand law enforcement our other accept payment by any of the following payment required for this item. Items will be shippedwithin 24hrs of receipt of payment.

We offer FREE shipping on all orders via:

Your order will be shippedwithin 1 businessday of receiving payment (Monday-Friday) and you should expect to receive it 3-4 daysafter ship date.

In the unlikely event that your item is lost or damaged during shipment, we will takeresponsibilityand will immediately ship BACK GUARANTEE

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one.

You can return a product for up to 30days from the date of purchase.

Any product you return must be in the same condition you received it and in the original packaging.

Limited Lifetime Warranty

For as long as you own this product we guaranteed it to operate properly and be free of defects in materials and workmanship. Should a Galak Electronics product fail at any time, return it to us. We will repair it, or at our discretion, replace it at no additional charge, and pay the return shipping cost. If the failure is found to be due to user negligence (i.e. exceeding maximum rated specifications, water damage, short circuits) you will be charged a maximum cost no more than the original purchase price.

Fast Free ShippingLifetime WarrantyFriendlyCustomer ServiceOffering the Best Deals onTMAC Traffic Light Sequencer "Noiseless" 120VAC / 500W per channel
Guaranteed to work with all LED and incandescent lights!Traffic Light not includedClick here and add 6' power cord to your cart for just $3.49 with sequencer improved with the latest in solid state technology, our AC Traffic LightSequenceris the perfect solution for your vintage traffic signal. Accepting standard 120VAC line voltage (240VAC available on request), this sequencerprovides over 500 Watts of power per channel and will drive full-sized LED and incandescent traffic lights (This includes all household incandescent and LED bulbs).Solid statealso means quiet, effortlessswitching for many years.Mechanical relays are noisy and can fail after several months under shortcycle times. There are 30+customsequences packed into our unit, whichareeasily changedwith the push of a button (Note: the sequence is storedeven when powered off).

Thisunit comes withquick installation instructions and four (4) adhesive standoffs for effortless mounting on virtually any surface. No need to buy additional hardware or fumble with crimp connectors. Installs in less than 10 minutes. Your traffic light doesn't havea power cord?No problem. Simply place this sequencerin your cart and thenClick hereto add a power cord for just$3.49. Make sure to add both the sequencerand power cord to the cart to ensure that you get free domestic shipping on both. If you are inadvertently charged shipping, don't worry, we will refund any and all shipping charges on domestic purchases. Buy with confidence. Made in the to program mode selection with pushbutton control.

30uniquelight sequence modes including 12realistic traffic modes.

Separate digital control for "YELLOW" allowsfor realistic operation (3 to 8s).

User selectable durationfrom 1 second to 2 minutes (determined by mode).

Wide input voltage range, acceptsfrom 90 to 130VACwith input fuse protection.

Highly efficient power conversion draws less than0.5W from the logic side.

Independent outputs channels for operating LEDs or Incadescent lamps.

Solid state switching for silent operation (no clicking mechanical relays).

Snubberless™ technology to protect against reverse voltage spikes.

Onboard LEDs to show current output states for easy programming and setup.

Compatible withall traffic lights &bulbs (non-dimmable LED bulbs included).

Four adhesive standoffs to allow for effortless Voltage:90VAC to 130VAC (180VAC to 260VAC for 240VAC version)

Max Output Rating:120VAC @ 4.2A per channel (fused at 5A)

Wattage Rating:4 Watts (minimum) 500 Watts (maximum) per channel

Input Connector:14-26AWG, 250VAC @ 16A screw terminals

Output Connector:14-26AWG, 250VAC @ 16A screw terminals

Delay Range:VR1: 1-120 seconds (yellow 3-8seconds via separate button)

Board Dimensions:3.94 x 1.97" (10 cm x 5.0 cm)

Board Material:0.062" (1.6 mm) FR-4, withsolder mask & silk screen

Unit Weight:1.15ounces (33grams)

DISCLAIMER:This unit is not designed tocontrol,manipulate or inhibit the natural pattern of an actual traffic signal. Complies with all FCCand law enforcement regulations.

See our other accept payment by any of the following payment required for this item. Items will be shippedwithin 24hrs of receipt of payment.

We offer FREE shipping on all orders via:

Your order will be shippedwithin 1 businessday of receiving payment (Monday-Friday) and you should expect to receive it 3-4 daysafter ship date.

In the unlikely event that your item is lost or damaged during shipment, we will takeresponsibilityand will immediately ship BACK GUARANTEE

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one.

You can return a product for up to 30days from the date of purchase.

Any product you return must be in the same condition you received it and in the original packaging.

Limited Lifetime Warranty

For as long as you own this product we guaranteed it to operate properly and be free of defects in materials and workmanship. Should a Galak Electronics product fail at any time, return it to us. We will repair it, or at our discretion, replace it at no additional charge, and pay the return shipping cost. If the failure is found to be due to user negligence (i.e. exceeding maximum rated specifications, water damage, short circuits) you will be charged a maximum cost no more than the original purchase price.

test test

---

---

---